立式圓盤注塑機1

立式圓盤注塑機是一種高效、精密的塑料成型設備，其特點主要包括以下幾個方面：

1. 結構特點：

   - 立式設計，占地面積小，約為臥式機的一半，節省空間。

   - 無柱鎖模，臥式注塑，三面開模，操作方便、安全。

2. 注射系統：

   - 注射壓力大，扭矩液壓馬達控制，螺旋扭力大，預塑性高。

   - 多段壓力輸出，壓力反應靈敏，精確度高。

3. 合模系統：

   - 模具的重量由水平模板支撐，上下開啟和關閉，不會發生類似臥式機器的模具重力引起的前倒，使模板無法關閉的現象。有利于持久性保持機械和模具的精度。

4. 嵌件成型：

   - 容易實現嵌件成型。因為模具表面朝上，嵌件放入定位容易。采用下模板固定、上模板可動的機種，拉帶輸送裝置與機械手相組合的話，可容易實現全自動嵌件成型。

5. 自動化生產：

   - 通過簡單的機械手可取出各個塑件型腔，有利于精密成型。一般鎖模裝置周圍為開放式，容易配置各類自動化裝置，適應于復雜、精巧產品的自動成型。

6. 模具保護：

   - 立式轉盤注塑機配備有模具保護控制裝置，通過低壓試合模，避免模具由于異物或未完全閉合而受損。

7. 適應性廣：

   - 拉帶輸送裝置容易實現串過模具中間安裝，便于實現成型自動生產。容易保證模具內樹脂流動性及模具溫度分布的一致性。

8. 節能環保：

   - 立式圓盤注塑機在設計上注重節能，同時在生產過程中對環境影響小，符合環保要求。

綜上所述，立式圓盤注塑機以其高效、精密、靈活和環保的特點，廣泛應用于汽車、電子、醫療等領域，是塑料成型行業的重要設備之一。

Vertical disc injection molding machine is a kind of high efficient and precise plastic molding equipment, its features mainly include the following aspects:

1. Structural features:

   - Vertical design, small footprint, about half of horizontal machine, space saving.

   - No column mold locking, horizontal injection, three-side mold opening, easy and safe operation.

2. Injection system:

   - High injection pressure, torque hydraulic motor control, high screw torque, high pre-molding.

   - Multi-stage pressure output, sensitive pressure response, high accuracy.

3. Mold closing system:

   - The weight of the mold is supported by the horizontal template, up and down to open and close, will not occur similar to the horizontal machine mold gravity caused by the front fall, so that the template can not close the phenomenon. It is beneficial to maintain the accuracy of the machine and mold in a durable manner.

4. Insert molding:

   - Easy to realize insert molding. Since the surface of the mold is facing upward, it is easy to put the insert into the position. If we adopt the type of machine that the lower mold plate is fixed and the upper mold plate is movable, and if we combine the belt conveyor with the manipulator, we can easily realize the fully automatic insert molding.

5. Automated production:

   - Each cavity can be taken out by a simple manipulator, which is conducive to precision molding. Generally, the mold clamping device is open around the mold, so it is easy to configure various kinds of automation devices, and it is suitable for the automatic molding of complex and delicate products.

6. Mold protection:

   - Vertical rotary table injection molding machine is equipped with mold protection control device, through the low-pressure trial mold closure, to avoid mold damage due to foreign objects or incomplete closure.

7. Wide adaptability:

   - The pull belt conveyor is easy to realize the string over the middle of the mold installation, which is convenient to realize the automatic production of molding. It is easy to ensure the consistency of resin fluidity and mold temperature distribution within the mold.

8. Energy saving and environmental protection:

   - Vertical disc injection molding machine in the design of energy-saving, and at the same time in the production process on the environment has little impact, in line with environmental requirements.

In summary, vertical disc injection molding machine with its high efficiency, precision, flexibility and environmental protection features, widely used in automotive, electronics, medical and other fields, is one of the important equipment in the plastic molding industry.